JSA library / Outdoor & Grounds

Pressure Washing JSAJob Safety Analysis template

Cleaning buildings, equipment or surfaces with a pressure washer. Use it as-is or change it to fit your job, then walk the site and add what's different today.

Make this JSA on your phone →

Free · no account · the crew signs on the same phone · prints a professional record

Date

Location

Person in charge

Company

Nearest ER / address

Muster point · Emergency: 911

Job steps, hazards & controls

#	Job step	Hazards	Controls
01	Set up the washer	Hose whip at failed fittings Engine exhaust in enclosed areas Fuel fires	Inspect hoses and fittings Run engines outside only Fuel when cool
02	Protect the area	Water into outlets, lights and panels Slippery surfaces	Cover outlets; keep spray away from electrical Cone off wet walkways
03	Wash	Injection injuries from the spray Kickback from the wand Chemical splash	Never point the wand at anyone or your own hand and feet Two hands; firm footing; trigger lock on when not spraying Eye protection and gloves; chemicals per the label
04	Shut down	Pressure trapped in the hose	Shut off and squeeze the trigger to bleed pressure before disconnecting

Don’t forget to check

Chemicals & SDSLaddersOverhead Power Lines

Today’s site-specific hazards

Hazard	Control

Crew sign-in: I reviewed this JSA and I can stop work

Name	Company / role	Signature	Time

How it works on your phone

1 · Pick itTap the button above. This JSA loads with the checks crews most often forget already suggested.

2 · Walk the siteAdd where you are, who's in charge and the nearest ER. The first person on site adds today's hazards.

3 · Crew signsPass the phone. Each person reads every step and signs. Print or save the PDF.

This JSA is a starting point built from common field practice. Your job, your site and your company's procedures come first: change anything that doesn't fit, and follow your permits and regulations.